Triple 73L Extraction System
ESTIMATED DAILY THROUGHPUT: 450-635 LBS
SOPHISTICATED ENGINEERING & DESIGN
Over 30 Years of R&D experience & hundreds of installations around the world.
MAXIMIZED THROUGHPUT
Extracting Cannabis? With Method HIGHTECH standard operating procedures for extraction you will double your yield compared with alternative extraction methods.
POSITIONED FOR THE FUTURE
Automation is a generic term. It does not provide any information on what the machine is really doing on its own. Automation for us is not just the control of pressure, flow or temperature. We have introduced a new concept, “Adaptive Automation”, to describe a new hardware/software system capable of modifying the process cycle as required by the operator. This new automation literally changes the way the system will produce the extract, something completely different from simply controlling pressure and temperature.
UNMATCHED POWER & CONTROL
Take the reigns yourself with the most powerful & advanced extraction systems in the known universe. Paired with the cleanest & most efficient solvent, CO2. allows for the broadest product range in the industry.
Configurations
This machine is designed to work with one or two pumps, one for CO2 and another one for co-solvent (optional), three extraction vessels, three/four separation vessels and separated chiller and heater. It can reach max pressure (Pmax) of 330 bar and max temperature (Tmax) of 85 °C. There are two pressure set-points: the first one is for extraction vessels, and the second one for separation vessel. There are 5 pressure gauges and voltage can be chosen on request.
Carbon dioxide is continually recycled with a close circuit for fluid recirculation. It’s full automated and process is controlled by on board computer. Automation not only controls pressure and temperature but operates the full extraction process. See here the concept design.
Included with the system
All supercritical CO2 systems need some ancillary equipment to work. We provide all the equipment necessary to operate systems with CO2 in the supercritical state at no additional cost to the customer. All the equipment listed below is included.
Systems operating with supercritical CO2 need a chiller to liquefy the gaseous CO2 during the recirculation process or to condense some aqueous compounds in the cooled separator or cold trap. The chiller also keeps the liquid CO2 in thermodynamic equilibrium inside the working tank (accumulator), ensuring the continuous operation of the machinery 24/7. Finally, through a special exchanger, it allows the diaphragm metering pump to avoid cavitation and relative loss of efficiency. The system will switch on/off automatically the chiller. The chiller is included in the price for all Lab and Production series systems.
- Voltage/Frequency – 3 Ph 460/60 V/Hz or 400/50 V/Hz
- Installed Power – 8.98/14 kW/A
- Size (WxHxD) – 2×4.2×4.6 feet (60x130x140 cm)
Systems operating with supercritical CO2 need a boiler (or heater) to produce hot water, necessary to transform liquid CO2 into supercritical CO2. In addition, the boiler, producing hot water at a given temperature, will allow you to set the process parameters of the extractors, the fractionation tower and the gravimetric and cylindrical separators. It is also essential to power the evaporators exchangers which, positioned after the pressure control valves, recover the heat loss caused by the Joule-Thomson effect. The boiler is included in the price for all Lab and Production series systems.
- Voltage/Frequency – 3 Ph 460/60 V/Hz or 400/50 V/Hz
- Installed Power – 12.7/19.9 kW/A
- Size – 1×1.8×2.4 feet (30x55x75 cm)
- Water Connection In/Out – 1¼”x1″ M
There are two pharma-grade diaphram dosing pumps:
- The most important is the CO2 pump, the carbon dioxide is the principal solvent for the extraction of apolar chemical compounds.
- The secondary pump is used for the release of polar or medium apolar co-solvents during the process – useful for the extraction of chemical compounds with different degrees of polarity.
At the condition of max-pressure, these pumps can ensure:
- CO2 Flow: 300 kg/h
- Co-Solvent Flow: 30 L/h
The extraction process is based on small variations of solvent’s (CO2) pressure and temperature. These critical operations are ensured by several heat exchangers filled with water, which is heated or cooled by a separated, external chiller and heater.
To be compliant with GMP directives, we supply a stainless steel electrical cabinet. The electrical cabinet is included in the price for all Lab, Production and Industrial series systems.
Systems operating with supercritical CO2 need a cold trap to condense all the micro drops of water carried by the gaseous CO2. In this way the water extracted from the raw material will not recirculate in the hydraulic circuit. The cold trap is included in the price for all Lab, Production and Industrial series systems.
Systems operating with supercritical CO2 need a canister to guarantee the absence of cross contamination and cleaness of the extractor. GMP regualtion requires baskets in which to put the raw material and seal it before inserting it into the extractor. To remove the extractor lid, unloading and reloading the basket, we supply an electric hoist that lifts up to 250 kg in weight. The hoist is equipped with a wired control with which to control the operation of the hoist. The hoist is included in the price for all Lab and Production series systems.
Systems operating with supercritical CO2 need a Liquid/solid to gas phase separator filter to guarantee that solid parts such as waxes or paraffin or liquid parts such as oil or extract can return to the circulation in the extraction system. Liquid/solid to gas phase separator filter is included in the price for all Lab, Production and Industrial series systems.
Systems operating with supercritical CO2 need a Liquid CO2 level meter to manage the automatic CO2 filling. Knowing exactly the level of liquid CO2 in the working tank is very important because it allows to automate the automatic filling by taking fresh CO2 from the cylinders or from the cryogenic tank. The control takes place continuously from 0 to 100%. Liquid CO2 level meter is included in the price for all Lab, Production and Industrial series systems.
Other Specifications
- ASME or PED certified safety valve for each vessel in isolated tubing from vessel.
- PLC microprocessor Intel i7
- Compressed air pressure 100 psi or 7 bar
- Compressed air flow 1 CFH or 28 L/hr
- 2 Back pressure automatic pilot valves
- 2 Automatic back pressure valve
Safety
- This system can be equipped with a safety Certified PLC in addition to process PLC controlling the position of the lids, the position of the valves and other safety sensors assuring safety operations. Improving safety of the operator is our mission. CE or UL certification for the electrical panel is available as an option. Pressure vessels are ASME-certified, and control system is SIL4-rated.
Vessel Volumes
73 L
73 L
Extractor 3
73 L
60 L
60 L
20 L
15 L
15 L
200 L
Footprint
Width
17.7 ft (5.4 m)
Height
9 ft (2.75 m)
Depth
7.9 ft (2.4 m)
Weight
15873 lbs (7200 kg)
Recommended Room Size
Floor: 27.5 ft x 18 ft (8.4 m x 5.5 m)
Ceiling Height: 14.4 ft (4.4 m)
Technical Specifications
Voltage
460 AC-V / 400 AC-V
Frequency
60 Hz or 50 Hz
Installed Power
30 kw
Current
50 A
METHOD HIGHTECH
Years of research & development at the push of a button. As part of our Turnkey Package you will recieve our complete set of proprietary SOPs and recipes for best practice extraction methodology based on input material and desired output.
GMP READY
We provide all the necessary documentation requested by qualification inspectors and authorities, such as: Material Certificate Welding Certificate USR (User Requirement Specifications) DQ (Design Qualification) IQ (Installation Qualification) OQ (Operational Qualification)
REMOTE ASSISTANCE
We provide full support to solve technical problems quickly and for routine maintenance interventions. In many cases our technicians are able to diagnose and solve problems by tapping into the system remotely using our proprietary technology for remote support without having to physically go to the installation site. If it is not technically possible to solve the problem remotely, the technician will be responsible for organizing an intervention on site. All support technicians are qualified with years of experience with the support of our entire lab & engineering team.
URS VALIDATED
User Requirement Specifications means the functions that a specific device must have in order to satisfy the needs and requirements of its end user; or, more simply, it is what a device is expected to be able to offer to those who use it, in terms of functionalities. Generally their specification takes place through the drafting of a specific document (called User Requirement Specifications – URS) which takes place in the validation phase of the machinery itself, therefore before this is actually designed.