50L Near Critical CO2 Micronizer
Use this Lab CO2 Exctraction System for:
Lab machines are designed to test a new lot of material/new matrices extraction conditions to be used in bigger extraction systems as per HACCP and GMP standard procedures. The utilization of a pilot plant also allows you to obtain good quality extracts and/or refined products on which it is possible to perform a wide range of tests, including evaluation panels.
With extraction systems having at least 7 liters of volume, it is possible to produce small series of samples for commercial feasibility evaluation. The configuration is as flexible as possible. It starts with the smallest 1.7 liters model SCFN-L1, up to the 12 liters model SCFN-L12. Above this limit, please click on Pilot systems.
It is a lab system equipped with one 50-liter expansion vessel. Stainless steel frame to comply with HACCP and GMP guidelines. Voltage 220V, frequency 60Hz or 50Hz, installed Power 1 kW, Current 5A. PLC on board and 7″ touch screen.
Configuration of Near Critical CO2 micronizer
This machine is designed to work with one CO2 bottle with an inner tube and one N2 bottle. See here the concept design.
This system is equipped with two safety relief valves. Improving safety of the operator is our mission.
- ASME-certified safety valve for each vessel in isolated tubing from the vessel.
- Process PLC microprocessor
- Compressed air pressure 100 psi or 7 bar
- Compressed air flow 1 CFH or 28 L/hr
Certifications are mandatory for high pressure equipment. This machine is certified PED/CE for Europe, Africa South America and other countries accepting EU regulation or ASME/UL for North America and other countries requesting ASME regulation.
We are ISO 9001 certified by TUV, UL listed, ASME certified, CE and PED certified by Apave, CRN for Canada.